  M6000 Self Contained Passenger Lift
The M6000 is a small footprint, space-efficient passenger lift designed to be used in existing buildings, serving up to 12 levels with 30 metres of travel. Footprint sizes available from as little as 1000mm x 750mm.
 Do you have space issues with fitting a passenger lift? No obvious place for it to go?
Take a look at the M6000 - the latest in self-contained lift technology offering a 675kg capacity lift, within its own shaft, which we always supply as part of the package. Equipped with the latest belt drive technology this lift travels at a speed of 0.6metres per second and can reach as high as 30 metres, serving up to 12 floors.
- Quick travel between floors - 0.6 metres per second
- Extremely space efficient
- Can have fully glazed shaft
- Little building works
- Little, or no horizontal loadings on building
View the Presentation for the M6000
More information about the M6000 
The M6000 is a conventional lift built to EN81 standards and is ideal for installing within existing buildings where no shaft is apparent. Designed primarily for installation within, or alongside, a staircase the shaft can be supplied either fully or partially glazed, or even in a solid finish.
This unit is highly space efficient and the shaft footprint can be as little as 750mm wide x 1000mm deep, however it is available in over 140 different sizes.
Should you find it impossible to meet the requirement for a 1000mm deep pit or 3540mm height requirement from finished floor level to top of shaft, then the unit can be provided with reduced dimensions, however this is only possible with the strict approval of the Authorities. Specification of the M6000
 Maximum travel - 30 metres- Maximum no. of stops - 12
- Speed 0.6 m/sec
- Maximum 9 person capacity
- Drive system - Polyurethane toothed belt
- Over 140 different shaft size configurations
- Min 750 (w) x 1000 (d)
- Max 1300 (w) x 1750 (d) or 1000 (w) x 2160 (d)
- Open front only or Open through configurations
- Car width – Shaft width less 200mm
- Car depth – Shaft depth less 150mm
- Automatic centre opening car doors
- Single hinged landing doors
- 415v frequency drive
- Solid metal faced insulated shaft panels
- Low cost ownership
- Rapid installation with no hidden costs
- Major mechanical drive components guaranteed for 2 years
Options available on the M6000
- Glazing to all sides
- Mixing of glazed and solid panels
- Glazing to lift car walls
- Choices of landing door design
- Fire rated landing doors
- Contrasting colour doors
- Automatic doors
- RAL colours
- Exclusive car and ceiling finishes
- Handrail - stainless steel or wooden
- Teak, oak or stainless steel door handles
- Black box interior for client’s own finishes
- Mirror
- Fold down seat
Sizes available for the M6000The car width is equal to the shaft width minus 200mm. The car depth is equal to the shaft depth minus 150mm. Same for single entrance or through type car. The door width is equal to the shaft width minus 200mm, except sizes in orange, which have 800mm doors. Please enquire for other sizes. Gallery of the M6000
M6000 Installation
M6000 Installation
M6000 Installation
M6000 Installation
M6000 Installation
M6000 Installation
Glazed unit under installation
Glazed unit under installation
Looking down lift shaft
General shot of the M6000
General shot of the M6000
General shot of the M6000
General shot of the M6000
General shot of the M6000
General shot of the M6000
General shot of the M6000
General shot of the M6000
By A Website Design
|
Public Access Lifts 